We posted a note on the Hallicrafters reflector some time ago regarding a tick when the high voltage is applied with the SR-2000 - P2000. We successfully cleared the problem by cleaning the P-2000 connector. Since then it has reappeared. We now have a definite fix.
Both the P-2000 and SR-2000 connectors have a metal jacket. The P-2000 connector has a plastic insert that is held in place by a screw. The screw, when inserted, contacts the metal jacket and apparently is too close to the 2700 volt pin. This causes a static voltage to build on the jacket that finally arcs to the jacket in the SR-2000 causing a tick and noise of varying duration. The fix is simply to replace the metal screw with a nylon version. The absence of the tick and reduced noise level is worth the five minute change.
Kindest regards, Jim K9AXN
HOT LINKS:
Home
|
Search QTH.NET Lists
|
Blast from the Past
|
Photo Archive
|
For Sale/Swap
Click here
to contact webmaster.
Click here
if there is no left-side menu frame.
This page last updated 30 Nov 2024
